Yamaha DRIVE 2 SUPER HAULER 2019 Owner's/Operator's Manual page 19

OFF ON
BAR LEVEL
VOLT 48.95 47.8 47.4 46.9 46.4 46.0 44.8 44.0 43.5
OFF ON
BEEP
J2F
BATTERY
Y-2842
9 8 7 6
BATTERY
Y-2843
Y-2844
CONTROLS
As the battery energy decreases, the
LEDs will move to the left toward the
"E." When the LED light below the "E"
is the only one lit, the batteries must
be charged.
Use the table to determine the
remaining battery capacity. For
example, if 7 of the 9 LED lights are
lit, batteries still have approximately
47.4 volts left. When the batteries fall
to 43.4 volts or less, 1 LED will blink
on and off, meaning the batteries
should be charged immediately.
5 4 3 2
DRIVE SELECT SWITCH
The drive select switch is used
to shift the vehicle into forward or
reverse. After coming to a complete
stop, move the switch to the desired
position.
Switch Position
FWD
REV
TIP
The reverse alarm will sound when
the drive select switch is depressed
to the "REV" position.
1 1 BLINK
43.4 >
Car Movement
FORWARD
REVERSE
5-3
5