Problem
You have registered the
Wireless Digital Audio on the
Home Server without
specifying the device name,
but cannot find the Wireless
Digital Audio on the
VGF-WA1 page on the Home
Server Settings Page.
Others
Problem
You cannot access the Home
Server Settings Page.
Indicator lights
Problem
The NETSERVER indicator
light is blinking.
The NETSERVER indicator
light does not turn on.
The HDD indicator light lights
in orange.
The HDD indicator light is
blinking in orange.
The HDD indicator light is
blinking alternately in green
and orange.
Causes/measures
You may have connected or removed the Wireless Adapter while you
were registering the Wireless Digital Audio. Place the Wireless Digital
Audio into standby mode, turn on the Home Server and register the
device once again.
Causes/measures
The IP address is not correct. Check if the Home Server has obtained
an IP address from your network router or Internet service provider.
Press the DISPLAY button several times to display the IP address of
the Home Server. If it begins with "169., " it is not the IP address
obtained from the network router or the Internet service provider.
Check the network devices, including cables and hub devices for
appropriate connection.
Press and hold the CANCEL button on the Home Server for 10
seconds or longer to clear the administrator registration and the IP
address settings.
Causes/measures
Your Home Server is getting ready for access from the Internet. If the
indicator light stays unlit for 5 minutes or longer, run the server test on
the Home Server Settings Page (page 42).
Access from the Internet is disabled. Your network router may not be
UPnP compliant or has not been assigned a global IP address. Run the
server test on the Home Server Settings Page (page 42).
The remaining free space on the hard disk drive of your Home Server
is less than 10%. Delete unnecessary data.
The remaining free space on the hard disk drive of your Home Server
is 1 MB or less. Delete unnecessary data.
The hard disk drive on your Home Server is not accessible. Restore
your Home Server on the Home Server Settings Page (page 54).
1