Philips EP5065 User Manual page 15

A Milk dispensing spout
A1 Milk tube
A2 Rubber support
A3 Milk frother lid
A4 Milk frother connector
A5 Housing of milk dispensing spout
Disassembling the milk dispensing spout
1 Press the release buttons on both sides of the top of the milk dispensing unit (1) and lift the top off
the milk container (2) (Fig. 32).
2 Turn the milk dispensing unit upside down and hold it firmly in your hand. Pull the milk tube off the
support (Fig. 33).
3 Press the release buttons on the milk frother and remove the milk frother from the the rubber
support (Fig. 34).
4 Pull the milk frother connector out of the milk frother (Fig. 35).
5 Rinse all components under a lukewarm tap.
Reassembling the milk carafe
1 To reassemble the milk dispensing spout, follow steps 2 to 4 of 'Disassembling the milk dispensing
spout' in reverse order.
2 Place the milk dispensing spout back into the top of the milk carafe.
3 Place the top of the milk carafe back onto the milk carafe.
Note: Before you place the milk dispensing spout back into the top of the milk carafe, move the pin
inside the top to the correct position. If this pin is not in the correct position, you cannot place the milk
dispensing spout back into the top of the milk carafe (Fig. 36).
Monthly cleaning of the milk carafe
Only use Philips milk circuit cleaner for this cleaning cycle.
1 Pour the contents of the milk circuit cleaner sachet in the milk carafe. Then fill the milk carafe with
water up to the MAX indication (Fig. 37).
2 Insert the milk carafe into the machine and place a container under the milk dispensing spout.
3 Press the MENU button, select DRINKS and scroll to MILK FROTH. Press the OK button to start
dispensing the cleaning solution.
4 Repeat step 3 until the milk carafe is empty.
5 When the carafe is empty, remove the container and the milk carafe from the machine.
6 Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX level indication.
7 Insert the milk carafe into the machine.
8 Place the container under the milk dispensing spout.
9 Press the MENU button and select MILK FROTH in the DRINKS menu to start the carafe rinsing
cycle.
10 Repeat step 9 until the milk carafe is empty.
11 Repeat steps 6-10.
B Lid of milk dispensing unit
C Milk dispensing unit
D Milk container
English
15