Using Installation/Service Mode Of Erv Wired Remote Controller - Samsung RHF025EE Service Manual

8-2 Using installation/service mode of ERV wired remote controller

Additional functions of ERV wired remote controller
Sub menu
Main menu
Exit
Set, Cancel
1. If you want to use the various additional functions for the ERV wired remote controller, press the Mode and ∧ buttons at the
same time for more than three seconds.
You will enter the additional function settings, and the main menu is displayed.
2. Refer to the list of additional functions for the ERV wired remote controller on the next page, and select the desired menu.
Using the ∨/∧ buttons, select a main menu number and press the Away button to enter the sub-menu setting screen.
Using the ∨/∧ buttons, select a sub-menu number and press the Away button to enter data setting screen.
When you enter the setting stage, the current setting is displayed.
Refer to the chart for data settings.
Using the ∨/∧ buttons, select the settings and press the Away button to move to the next setting.
Press the Set button to save the settings and exit to the sub-menu setting screen.
Press the Timer button to exit to normal mode.
Timer button while your are setting data, you can exit to the sub-menu setting stage without saving
your changes.
Note
Samsung Electronics
All manuals and user guides at all-guides.com
SEG used
1 2
Mode or Away button to move the digit of SEG.
Left and right
Up and down
8-5