Advertisement
8.4.
Front Wall Panels
8.4.1.
Place 4 the sheeting on the work table. Fit 20D the top channel, 20E the bottom channel, 41B the jamb (There are pre-drilled holes for
next step on both 4 and 41B and these must be aligned.) and 33R the mid wall channel to the sheeting and fix them using the self tapping
screws. (NOT those with cross mark in this stage)
8.4.2.
Fit the 41A the jamb, 42 the jamb and 23 the bottom channel and fix them using the self tapping screws (NOT those with cross mark in
this stage). Be aware of the joint details per the diagrams. (DIAGRAM B IS AS THE SAME AS DIAGRAM A.)
© Jack Sealey Limited
Original Language Version
GSS1508G
Issue: 1 - 28/08/14
Advertisement
