Download Print this page
Sealey GSS150815G Instructions Manual
Sealey GSS150815G Instructions Manual

Sealey GSS150815G Instructions Manual

Galvanized steel shed green 1.5x0.8x1.5m
Hide thumbs Also See for GSS150815G:

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to
when building this shed.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep children and unauthorised persons away from the working area.
DO NOT use the shed for any purpose other than that for which it is designed.
Use appropriate safety clothing including eye protection.
Note! The assembly of this product will require assistance.
2. INTRODUCTION
Galvanized, steel panels easily assembled to form a rigid and secure shed. Has a flat roof and double doors. All other models have skillion (sloping)
roofs and single doors. Doors are secured by cross bolt and eyelet which will accept a padlock (not included) for additional security. All models are
supplied with bolt-down fixing kits.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GSS15081G
Overall Size (W x D x H*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 x 800 x 1500mm
Roof Type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flat
*Minimum Wall Height
© Jack Sealey Limited
I
NSTRUCTIONS FOR:
GALVANIZED STEEL SHED GREEN
1.5 x 0.8 x1.5m
GSS150815G
MODEL NO:
Original Language Version
GSS150815GG
Issue: 1 - 01/09/14

Advertisement

loading

Summary of Contents for Sealey GSS150815G

  • Page 1 GSS150815G MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Check contents: Lay out all components with the part numbers facing upwards and check off against the parts lists on the next four pages. In the unlikely event of a missing component please contact you local Sealey dealer. © Jack Sealey Limited...
  • Page 3 1500 x 735 sheet 1500 x 770 sheet 1500 x 770 sheet 855 x 770 sheet 855 x 735 sheet 1445 x 710 sheet 1445 x 710 © Jack Sealey Limited Original Language Version GSS150815G Issue: 1 - 01/09/14...
  • Page 4 Original Language Version GSS150815G Issue: 1 - 01/09/14 © Jack Sealey Limited...
  • Page 5 Original Language Version © Jack Sealey Limited GSS150815G Issue: 1 - 01/09/14...
  • Page 6: Parts Diagram

    7. PARTS DIAGRAM Original Language Version © Jack Sealey Limited GSS150815G Issue: 1 - 01/09/14...
  • Page 7 You will find it easier to assemble the shed using trestles, with timber studding of equal or greater panel length. Trestles are available separately from your Sealey Dealer. Attach the studding to trestles with equal overhang using nylon cable ties or similar “safe” method.
  • Page 8 Note this channel is fitted with the flat face uppermost, ie. nearest the “top”, when the shed is assembled. 8.1.6. With 10mm long self tapping screws fix items 39C and 39D to top and bottom edges. Original Language Version GSS150815G Issue: 1 - 01/09/14 © Jack Sealey Limited...
  • Page 9 With self tapping screws fix item 21B to bottom edge except in position marked with asterisk *, and do not screw fix item 21F to top edge at this stage. See those fixings marked with asterisk *. Original Language Version © Jack Sealey Limited GSS150815G Issue: 1 - 01/09/14...
  • Page 10 With self tapping screws fix item 21B to bottom edge, but do not screw fix item 21F to top edge at this stage. See those fixings marked with asterisk *. Original Language Version © Jack Sealey Limited GSS150815G Issue: 1 - 01/09/14...
  • Page 11 8.1.3. Note that the smaller flange on the channels should always be adjacent to the outside face of the panel. The outside face is the top face in both diagrams. © Jack Sealey Limited Original Language Version...
  • Page 12 8.4.3. Fit item 50A (angles) to each edge, refer to diagram above for flange orientation. Fix with 10mm long self tapping screws. GSS150815G Issue: 1 - 01/09/14 Original Language Version © Jack Sealey Limited...
  • Page 13 Attach the end wall 14B to the rear wall 11A & 14A, then the opposite end wall 14C. Fix all walls with the 10mm long self tapping screws. Original Language Version GSS150815G Issue: 1 - 01/09/14 © Jack Sealey Limited...
  • Page 14 D3 has been fitted. See 8.6.2. 8.6.2. Slide D3 the door jamb into the top channel and fix with 10mm long self tapping screws. Original Language Version © Jack Sealey Limited GSS150815G Issue: 1 - 01/09/14...
  • Page 15 8.6.3. Fit the corner stiffener brackets item 72, fix with 10mm long self tapping screws. Original Language Version GSS150815G Issue: 1 - 01/09/14 © Jack Sealey Limited...
  • Page 16 Sandwich the stiffener plate item 75 between shoot bolt item 74 and door item 5D and “pop” rivet all three items together. This arrangement is at the top and bottom of the door item 5D. GSS150815G Issue: 1 - 01/09/14 © Jack Sealey Limited...
  • Page 17 8.8.2. Fit the shoot bolt item 70 and the bolt keeper item 71 and fix with 10mm long self tapping screws or 4mm diameter rivets. (fitting method A or B) © Jack Sealey Limited Original Language Version GSS150815G Issue: 1 - 01/09/14...
  • Page 18 Anchor bolts and M8 machine screws are supplied, see “FITTINGS PACK”. 8.9.3. Insert anchor bolts, re-fit steel angles (base brackets) and anchor shed to plinth slab. GSS150815G Issue: 1 - 01/09/14 Original Language Version © Jack Sealey Limited...
  • Page 19 (if applicable) into approved containers and dispose of the product and the fluids according to local regulations. Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.