Table of Contents
Advertisement
9.3.24 Power Input Assembly
The disassembly tool: cross-headed screwdriver (M3, M4), anti-electrostatic glove
1. Unscrew the M4 X 12 screw as shown in the figure below.
2. Unscrew two M4 X 12 screws.
3. Pull the power supply module; unscrew the screw to pull the whole assembly.
4. Unscrew five screws to remove AC-DC module.
Structure and Assembly/Disassembly 9-43
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DC-70 and is the answer not in the manual?
Questions and answers