Strip Chart Recorder; Heart Rate Grid - GE Corometrics 170 Series Operator's Manual

Strip Chart Recorder

Heart Rate Grid

3-12
Controls, Indicators, and Connectors: Strip Chart Recorder
The strip chart recorder is located on the right side of the front panel. Latches on
each side of the recorder open the paper drawer.
Two styles of paper are available: 30-240 BPM scale and 50-210 BPM scale.
Refer to "Chapter 4, Setup Procedures"
into the recorder.
One or two fetal heart rate trends print in the top (or left) grid of the strip chart
paper—depending on your model monitor and the active modalities.
If only one fetal heart rate is being monitored, the FHR trend is printed in black. If
twins are being monitored, the primary trend is printed in plain black while the
secondary trend is bolded.
Read "Chapter 5, Fetal Heart Rate Monitoring"
Recorder" for additional information about fetal heart rate trends and annotations.
170 Series Monitor
2003023-001
Figure 3-6. Strip Chart Recorder
for instructions on loading strip chart paper
and "Chapter 7, Strip Chart
Revision D