Segway Navimow User Manual page 12

STEP 2: Install the GNSS Antenna
1
Fixate the GNSS antenna on the tube.
3
Rotate the other extension tube onto the base fork.
12
5 Connect the GNSS antenna to the charging
station.
STEP 3: Check the GPS Signal
1 Connect the extension cable with the power supply.
A
Align the notch on the extension cable (A)
with the groove on the power supply connector (B).
2
B
Unfold the base fork and insert it into the ground.
2
4 Slide in the tube with the antenna.
6 Secure the cable on the pole with the supplied hook and
loop tape.
Turn the nut until they are locked into each other.
To ensure GPS signal, DO NOT
put anything on the antenna.