Unloading The Machine - Toro TX 427 Operation And Safety Manual

1. Tie-down loops

Unloading the Machine

1. Lower the ramp(s).
2. Unload the machine from the trailer with the
heavy end up the ramp, carrying loads low
(Figure 9).
•
If the machine has a full load-bearing
attachment (e.g., bucket) or a
non-load-bearing attachment (e.g.,
trencher), back it down the ramp.
•
If the machine has an empty load-bearing
attachment or no attachment, drive it forward
down the ramp.
1. Machine with full
attachment or
non-load-bearing
attachment—back the
machine down the
ramp(s).
Figure 8
Figure 9
2. Machine with empty or
no attachment—drive the
machine forward down the
ramp(s).
g242654
g317100
14