Related Manuals for Sealey PP40H
Summary of Contents for Sealey PP40H
- Page 1 INSTRUCTIONS FOR PLASMA INVERTER PP40H MODEL No: Original Language Version © Jack Sealey Limited 2013 PP40H Issue: 1 - 08/05/13...
-
Page 2: Introduction And Specifications
1.2. Model No: ......PP40H Weight: ......14.54kg Power Output: . - Page 3 DO NOT connect to structures or objects, other than the metal work bench which is supporting the workpiece. To do so may damage the safety system and will give a poor cut. Original Language Version © Jack Sealey Limited 2013 PP40H Issue: 2 - 08/05/13...
- Page 4 Low air pressure Warning amber LED temperature 3 pin connection amber LED Air line Work piece Fan cover connection connection to torch Pilot arc fig.4 connection Parts identification for Fig.1 and Fig.2 Original Language Version © Jack Sealey Limited 2013 PP40H Issue: 1 - 08/05/13...
-
Page 5: Air Supply
5.2. Ensure that the air supply pressure is set to a minimum of 80psi. The PP40H inverter requires 45-70psi and can be adjusted locally by rotating the regulator knob in (5.1). The inverter pressure gauge is on the front face in (fig.1). -
Page 6: Maintenance
100% indicates continuous usage. Max open circuit voltage current and corresponding voltage. AC supply details Effective current supplied Max RMS current absorbed Rated supply voltage Insulation protection rating Original Language Version PP40H Issue: 1 - 08/05/13 © Jack Sealey Limited 2013... - Page 7 Electrical and Electronic Equipment. When the product is no longer required, it must be disposed of in an environmentally protective way. Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.