Download Print this page
Sealey POWER PRODUCTS PI150 Instructions

Sealey POWER PRODUCTS PI150 Instructions

12v/230v

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained,
give you years of trouble free performance.
IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO
SO MAY CAUSE DAMAGE, OR PERSONAL INJURY AND/OR WILL INVALIDATE THE WARRANTY.
1.
SAFETY INSTRUCTIONS
DANGER! - Beware, lead-acid batteries generate explosive gases during normal battery operation.
If the battery terminals are corroded or dirty, clean them before attaching the clips.
Before attaching to battery, remove ill fitting clothing, ties, watches, rings and other loose jewellery. Contain long hair.
Keep children and unauthorised persons away from the working area.
WARNING! DO NOT use on any vehicles other than those with12Volt DC systems.
WARNING! For delicate items such as laptops, an anti-surge device is recommended.
DO NOT connect to any AC power source.
DO NOT dis-assemble. The inverter must be checked by qualified service personnel only .
DO NOT get inverter wet or use in damp or wet locations or areas where there is condensation.
DO NOT use the inverter for any purpose other than for which it is designed.
DO NOT pull the cables or clips from the battery terminals.
DO NOT operate the inverter if damaged.
 DO NOT connect to a positive earthed system. Ensure you have the polarity correct before connecting, red clip to positive (+)
battery terminal and black clip to negative (-) battery terminal.
Before connecting ensure nothing is plugged into the inverter.
WARNING! Inverters become hot during use.
When not in use store inverter in a safe, dry, childproof location.
PI150
2.
INTRODUCTION
Supplies continuous smooth 230V power from 12V DC power supply found in cars, caravans, boats and HGVs. Suitable for
powering small TVs, laptops, power tools and various other electrical equipment within the wattage rating of the inverter. Anodized
aluminium case provides durability and maximum heat dissipation. Safety features include automatic overload shut-down and a
low battery alarm to prevent damage to the supply battery. Supplied with cigarette lighter plug and/or battery clips depending on
model.
Input Voltage: . . . . . . . . . . . . . . . . . . . . . .12V DC. . . . . . . . . . . . . . . . . . . . . .12V DC. . . . . . . . . . . . . . . . . . . . . . . 12V DC
Output Voltage:. . . . . . . . . . . . . . . . . . . . .230V AC. . . . . . . . . . . . . . . . . . . . .230V AC . . . . . . . . . . . . . . . . . . . . . . 230V AC
Continuous Output Wattage:. . . . . . . . . .150W . . . . . . . . . . . . . . . . . . . . . . .300W . . . . . . . . . . . . . . . . . . . . . . . . 500W
Maximum Output Wattage: . . . . . . . . . . .300W . . . . . . . . . . . . . . . . . . . . . . .600W . . . . . . . . . . . . . . . . . . . . . . . . 1000W
Output Frequency Range: . . . . . . . . . . . .50Hz . . . . . . . . . . . . . . . . . . . . . . . .50Hz . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz
Dimensions (LxWxH): . . . . . . . . . . . . . . .165x105x60mm . . . . . . . . . . . . . . .180x105x60mm . . . . . . . . . . . . . . . . 230x105x60mm
Supply Connection: . . . . . . . . . . . . . . . . .Cigarette Lighter Plug. . . . . . . . . . .Cigarette Lighter Plug &. . . . . . . . . . Battery Clips
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse Replacement . . . . . . . . . . . . . . . . . .120/802257-S . . . . . . . . . . . . . . . . .PI300.V2-F . . . . . . . . . . . . . . . . . . . . PI500.V2-F
INSTRUCTIONS FOR:
POWER INVERTERS 12V/230V
MODEL No's:
PI300.V2
PI150
Original Language Version
PI150, PI300.V2 & PI500.V2
PI500.V2
PI300.V2
.Battery Clips
PI150, PI300.V2, PI1500.V2
PI500.V2
12/10/09
Issue: 2 -

Advertisement

loading

Summary of Contents for Sealey POWER PRODUCTS PI150

  • Page 1 PI150, PI300.V2 & PI500.V2 MODEL No’s: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
  • Page 2 SETUP & OPERATION Power Source Requirements 3.1.1 The inverter must be connected to a 12 volt DC negative ground ignition system. 3.1.2 The power source must be capable of providing between 10.6 and 15.5 volts and able to supply the necessary current to operate the load.
  • Page 3 WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. Sole UK Distributor, Sealey Group, www.sealey.co.uk...

This manual is also suitable for:

Power products pi300.v2Power products pi500.v2