Related Manuals for Sealey PP35.V2
Summary of Contents for Sealey PP35.V2
- Page 1 INSTRUCTIONS FOR PLASMA INVERTER PP35.V2 MODEL No: Original Language Version PP35.V2 Issue: 3 - 15/05/12...
-
Page 2: Introduction & Specification
MODEL No: Thank you for purchasing a Sealey plasma inverter. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS pRODUCT, pLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS. -
Page 3: Air Supply
Attach the air filter/regulator supplied to the rear panel of the unit using the fittings supplied. See fig.5. 3.7. Screw the air input fitting into the filter regulator as shown in fig.3. Original Language Version PP35.V2 Issue: 3 - 15/05/12... -
Page 4: Control Instructions
(post-air) will continue to flow for a further 30 seconds. Note: To minimise the possibility of accidental starting, the button must be pressed for fig.5 at least half a second before the cutting operation will start. Original Language Version PP35.V2 Issue: 3 - 15/05/12... -
Page 5: Maintenance
Never use tools to tighten nozzle components, hand tighten only. Manually dismantle the torch nozzle head (fig.9). Items 2 and 4 show standard and optional long electrodes and nozzles. Original Language Version PP35.V2 Issue: 3 - 15/05/12... -
Page 6: Rating Plate
Further guidance is given in IEC 974-13 ’Arc Welding Equipment - Installation and Use.’ Original Language Version PP35.V2 Issue: 3 - 15/05/12... -
Page 7: Troubleshooting
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. Sole UK Distributor, Sealey Group, www.sealey.co.uk...