Installing The Compressor Casing; Table 41 Tightening Torque (79041) - ABB A145-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
8.15

Installing the compressor casing

Fitting the wall insert and the diffuser
A130 - A140
Part number
79041
Table 41: Tightening torque (79041)
Always replace the O-ring (77005) (see section Spare parts).

A130 - A140
1. Fit a new O-ring (77005).
2. Install the wall insert (77000) in the compressor casing.
3. Fit the diffuser (79000) with fixing discs (79040) and screws (79041). Observe the tighten-
ing torque.
A145
1. Fit the lifting beam (90258) to the wall insert (77000).
2. Fit the swivel lifting eye (S) to the lifting beam. Secure lifting gear to the swivel lifting eye.
3. Fit a new O-ring (77005).
4. Install the wall insert (77000) in the compressor casing.
5. Fit the diffuser (79000) with fixing discs (79040) and screws (79041). Observe the tighten-
ing torque.
© Copyright 2017 ABB. All rights reserved.
A130 A135
M6 M6
8 Nm 8 Nm
HZTL4031_EN
Page 97 / 121
A145
A140 A145
M6 M6
8 Nm 8 Nm
Revision E January 2017