Removing Air Inlets - ABB A145-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
8.3

Removing air inlets

Mark the casing position for assembly.

Figure 29: Removing air inlets
1. Attach lifting gear to the filter silencer (81000) or air suction branch (82000).
2. Loosen and remove V-clamp (72020).
3. Remove filter silencer (81000) or air suction branch (82000), set it down properly in an
appropriate place and secure it.
4. Remove and dispose of the O-ring (81010 / 82010).
© Copyright 2017 ABB. All rights reserved. HZTL4031_EN
Page 78 / 121
Revision E January 2017