Toro power max 828 OE Operator's Manual page 6

Briggs Part No. 277566
1. When starting a cold
engine, close the choke
and press the primer two
times.
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
2. When starting a warm
engine, open the choke
and do not press the
primer.
Description
Handle bolts
Curved washers
Locknuts
No parts required
Carriage bolts
Locknuts
Cable tie
No parts required
No parts required
No parts required
No parts required
Qty.
4
4 Install the upper handle.
4
–
Install the traction control linkage.
2
Install the chute control rod.
2
1 Connect the wire to the headlight.
–
Fill the engine with oil.
–
Check the tire pressure.
–
Check the skids and scraper.
–
Check the operation of the traction drive.
6
Use