Toro power max 828 OE Operator's Manual page 5

112-6625
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
1. Traction drive—squeeze the lever to
engage; release the lever to disengage.
2. Warning—read the Operator's Manual.
Briggs Part No. 273676
1. Stop
2. Slow
Briggs Part No. 274681
1. Fuel—On
3. Cutting/dismemberment hazard,
impeller—do not place your hand in the
chute; stop the engine before leaving
the operator's position, use the tool
clear the chute.
4. Cutting/dismemberment hazard,
impeller—keep away from moving
parts; remove the ignition key and read
the instructions before servicing or
performing maintenance.
3. Fast
2. Fuel—Off
112-6626
Briggs Part No. 276923
1. Primer
2. Choke off (Run)
3. Choke on (Choke)
Briggs Part No. 276925
1. Warning—read the
Operator's Manual.
2. Warning—fire hazard.
5
5. Thrown object hazard—keep
bystanders a safe distance from the
snowthrower.
6. Auger/impeller drive—squeeze the
lever to engage; release the lever to
disengage.
4. Ignition key in
(Engine—Run)
5. Ignition key out
(Engine—Stop)
3. Warning—toxic gas
inhalation hazard.
4. Warning—hot
surface/burn hazard.