Panasonic DMR-HWT260 Operating Instructions Manual page 26

To confirm and edit a timer
programme
1
Press [PROG/CHECK].
e.g.,
Timer Recording HDD
Channel Name
Guide
Guide
New Timer Programme
Total 3/32
OK
Turn
RETURN
Timer Off
2
Select the programme, then perform the
operations.
• Red:
Deactivate a timer programme
- The timer icon "F" will change from red to
grey.
- Press the red button again to activate
timer recording standby.
(The timer icon "F" will change to red.)
• Green:
Resolve an overlap timer programme
- The overlapped timer recording list will
appear. ( 23)
• [DELETE]: Delete a timer programme
• [STATUS ]: Show programme information
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to "Timer recording options". (
3 Press [OK].
To exit the timer recording list
Press [EXIT ].
26
SQT1332
30:30 DR TUE 05.01.2016 XXXXXX
Schedule Space
Mode
TUE 12.01
OK
DR
XXXXXX - XXXXXX
TUE 12.01
OK
HG
XXXXXX - XXXXXX
TUE 12.01
DR
XXXXXX - XXXXXX
TUE 12.01
DR
XXXXXX - XXXXXX
Info
Delete
Page Up
Resolve overlap Keyword List
Page Down
25)
Screen icons
Red: Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
(Red)
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some
reason.
Auto Renewal Recording is set.
( 25)
Guide Link (
Series Timer Recording (
Displayed if the recording can fit in the
OK
remaining space
Daily or weekly timer programme is set.
• The timer remains active until the
(Date)
date indicated below
It may not be possible to record
because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (
- programmes are deactivated, etc.
[For_New_Zealand]
Split Programme (
• Programmes to be recorded with Keyword recording (
are not displayed.
25)
24)
.
15)
24)
27)