Panasonic DMR-HWT260 Operating Instructions Manual page 12

To stop partway
Press [RETURN ].
To restart setup ( 57, Auto Setup)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy Network Setting
Easy Network Setting
After completing "Easy Setting", you can continue
with "Easy Network Setting".
Select "Wired" or "Wireless", then press [OK].
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Select "Wireless".
Wired
Wireless
LAN cable connection ("Wired")
Follow the on-screen instructions to apply your
connection settings.
Wireless LAN connection ("Wireless")
Before beginning wireless connection setup
• Obtain your network name (SSID
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
• The default SSID,
Password (Key) etc., may
be printed on the router.
Select "Search for wireless network" or "WPS
(PUSH button)" and press [OK], then follow the
on-screen instructions and apply the settings.
12
SQT1332
Search for wireless network:
The available wireless networks will be displayed.
Select your network name and press [OK].
- If your Network name is not displayed, search
- Stealth SSID
• If your wireless network is encrypted, Encryption
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Press WPS button or corresponding button of
2 Press [OK].
§1
).
§1
e.g.,
§2
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
§3
PIN XXXXXXXXX
again by pressing the red button on the remote
control.
will not be displayed. Enter
§2
manually by using "Wireless Settings". (
Key Input Screen will be displayed.
Input the encryption key of your network.
Wireless router until the lamp starts flashing.
• For details, refer to the operating instructions
of Wireless router.
e.g.,
3
SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
Depending on the settings of the wireless router, its SSID
may not be found. For details, refer to the operating
instructions for the wireless router.
The wireless router compatible with Wi-Fi Protected
Setup may have the mark.
TM
61)
Wireless
router