Table of Contents
Advertisement
1
1
palm-rest assembly
3
tab
CAUTION:
Carefully separate the palm-rest assembly from the top cover to avoid
damage to the palm-rest assembly.
8 Using your fingertips, gently ease the palm-rest assembly from the top
cover.
9 Without pulling hard on the palm-rest assembly, turn the palm-rest
assembly over and place it on the top cover.
10 Lift the connector latch and pull the pull-tab to disconnect the
control-strip cable from the system-board connector.
11 Lift the connector latch and pull the pull-tab to disconnect the touch-pad
cable from the system-board connector.
12 Lift the palm-rest assembly off the top cover.
2
3
2
top cover
Palm-Rest Assembly
39
Advertisement
Table of Contents
