Removing Mig Gun To Replace With A Spool Gun - Miller Multimatic 215 Owner's Manual

.
A complete Parts List is available at www.MillerWelds.com

5-15. Removing MIG Gun To Replace With A Spool Gun

Open Pressure Assembly.
Cut Off End Of Wire.
Turn Off Power.
Knob
.
Hold wire tightly to keep it
from unraveling.
Loosen Knob, Disconnect Gun Trigger
Rewind Wire Onto Spool, Fasten
Plug, And Remove Gun From Unit.
End Of Wire To Spool.
(See Section 5-11 For Gun Installation.)
275178A / Ref. 802982A / Ref. 275174A / Ref. 267807A
OM-272989 Page 29