Markings On Tool - DeWalt DCL510 Original Instructions Manual

serViCe
a) Have your tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
additional specific safety rules for Worklights
WARNING: Fire hazard. Do not operate worklight or
charger near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes causing
personal injury.
• Do not expose light or charger to wet or damp areas. Do not
expose light or charger to rain or snow.
• Do not wash light or charger with water or allow water to get inside
light or charger. Do not submerge light in water at any time.
• Do not operate without lens cover assembly attached.
CAUTION: When not in use, place tool on its side on
a stable surface where it will not cause a tripping
or falling hazard. Some tools with large battery packs
will stand upright on the battery pack but may be easily
knocked over.

Markings on tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Do not stare directly into the light source.
date Code Position
The date code, which also includes the year of manufacture, is printed
into the housing surface that forms the mounting joint between tool and
battery.
Eng li s h
7