Maintenance - DeWalt DCL510 Original Instructions Manual

anything that it is not secure. Personal injury or property
damage may occur.
CAUTION: Only use the magnet and belt hook for hanging
the LED worklight. The magnet and belt hook are not
intended to support additional weight. Do not attach or
hang anything additional to the light or risk of breakage
may occur.
CAUTION: Do not use the magnet and belt hook to
reach with or use the magnet and belt hook to support
your weight in any situation.
Using the stand (b), belt hook (d) and magnets (e), the worklight can be
placed in multiple locations for ideal lighting.
The kickstand should be snapped into the home position if not in use,
as shown in Figure 1.

MaintenanCe

Your D WALT tool has been designed to operate over a long period of
e
time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
The charger and battery pack are not serviceable. There are no
serviceable parts inside.
• Do not attempt to repair the worklight. To assure product safety
and reliability, repairs, maintenance, and adjustments should be
performed by authorized D
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
WALT service centers.
e
Eng li s h
19