Samsung MultiXpress X703 Series User Manual page 257

Understanding display messages
Message
Replace with new The indicated imaging
imaging unit unit has almost
reached its estimated
imaging unit life
Replace with new fuser The life of the fuser unit
unit expires totally.
Replace with new The life of the transfer
Transfer roller roller expires totally.
Replace with new [tray The life of the tray
number] pickup roller pickup roller expires
totally.
Scanner locked or The CCD (Charged
another problem Couple Device) lock
occurred has been locked.
Meaning Suggested solutions
Replace the imaging unit
for the best print quality
when this message
a appears. Using a imaging
.
unit beyond this stage can
result in printing quality
issues (see "Replacing the
imaging unit" on page
230).
Replace the fuser unit with
a Samsung-genuine fuser
unit, call for service.
Replace the transfer roller
with a Samsung-genuine
transfer roller, call for
service.
Replace the tray pickup
roller with a Samsung-
genuine pickup roller, call
for service.
Unlock the CCD lock . Or
turn the machine off and
back on again. If the
problem persists, call for
service.
Message
Scan System Failure There is a problem in
[error number]:Turn off the scan system.
then on
Sensor Failure: [error There is a problem in
number]. Turn off then the sensor system.
on. Call for service if the
problem persists
Shake [color] toner Small amount of toner
cartridge is left in the indicated
cartridge.
The clock became initial The time setting of
time. Set a time again machine is initialized.
The IPv4 address The IPv4 address is
assigned to wireless LAN used
conflicts with that of elsewhere(wireless
other system. Check it LAN).
The IPv6 address The IPv6 address is
assigned to wireless LAN used
conflicts with that of elsewhere(wireless
other system. Check it LAN).
Meaning Suggested solutions
Turn the machine off and
back on again. If the
problem persists, call for
service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
• You may temporarily
increase the printing
quality by
redistributing the toner
(see "Redistributing
toner" on page 225).
• If the problem persists,
call for service.
Set the time setting in
Machine Setup.
Check the IPv4 address or
obtain a new IP address.
Check the IPv6 address or
obtain a new IP address.
10. Troubleshooting
257