Samsung MultiXpress X703 Series User Manual page 253

Understanding display messages
Message
Fuser Unit Failure [error There is a problem in
number]:Turn off then on the fuser unit.
Fuser Failure [error
number]:Turn off then
on. Call for service if the
problem persists.
[HCF number] cassette is The HCF is not securely
pulled out. Insert it latched.
properly
[HCF number] door is The HCF door is not
open. Close it securely latched.
[HCF number] is not The HCF is not properly
installed. Install the tray installed.
HDD System Failure There is a problem in
[error number]:Turn off the hard disk.
then on. Call for service if
the problem persists
HDD System Failure
[error number]: Call for
service
HDD Error [Error
number]. Check users
guide
Meaning Suggested solutions
Turn the machine off and
back on again. If the
problem persists, call for
service.
Close the HCF until it locks
into place.
Close the HCF door until it
locks into place.
Reinstall the HCF. If the
problem persists, call for
service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Message
Imaging Unit Failure: The imaging unit is not
[error number]. Install installed.
imaging unit again
Imaging unit Failure: There is a problem in
[error number]. Call for the imaging unit.
service
Imaging unit Failure: There is a problem in
[error number]. Please the imaging unit.
turn off then on
Imaging unit is not The imaging unit you
compatible. Check users have installed is not for
guide your machine.
Imaging unit is not The imaging unit is not
installed. Install the unit installed or the
imaging unit is not
properly installed.
Meaning Suggested solutions
Install the imaging unit. If
it is already installed, try to
reinstall the imaging unit.
If the problem persists, call
for service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Install a Samsung-genuine
imaging unit, designed for
your machine (see
"Available consumables"
on page 212).
Install the imaging unit. If
it is already installed, try to
reinstall the imaging unit.
If the problem persists, call
for service.
10. Troubleshooting
253