5.
Specify an operation that will perform if an alarm occurs.
•
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
•
E-mail sending : Specify the use of email transfer in the alarm input setup.
•
FTP sending : Specify the use of FTP transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
6.
When done, click [Apply (
Motion detection
1.
From the Setup menu, select the
<Event (
)> tab.
2.
Click <Motion detection>.
To set the Motion Detection
1.
Specify the use of motion detection.
2.
Select a sensitivity level of the motion
detection.
3.
Place the cursor at a point in the video
and drag it to whatever you need.
You can specify up to 4 motion detection
areas.
4.
Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 64)
5.
When done, click [Apply (
)].
)].
English _65