Table of Contents
Advertisement
4.
Select a quality and detection sensitivity for the ROI area.
5.
If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
You can specify up to 5 distinct areas.
6.
To cancel your selection, simply click [
7.
When done, click [Apply (
J
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 46)
Focus setup
You can adjust the Zoom magnification and Focus of the video.
1.
Select the <Audio & Video (
from Setup menu.
2.
Click <Focus setup>.
3.
Set the Zoom and Focus.
•
Zoom / Focus : Adjust the Zoom
magnification and Focus manually.
•
Auto Focus : Automatically adjust
Focus of the video.
4.
When done, click [Apply (
J
The focus may not fit correctly in the
following cases:
-
A change to the object in AF mode (sudden movement, appearance or disappearance)
-
A sudden change to the illumination while in AF mode
-
Image of a low contrast
-
When the camera is exposed to a strong light source in the front or surroundings
-
If the lens is covered with impurities
-
In a situation where AF is hardly applied, try to make recording with a high contrast object or
use the MF (manual focus) mode.
].
)].
)> tab
)].
English _55
Advertisement
Table of Contents
