Table of Contents
Advertisement
setup screen
OSD Setup
1.
Select <OSD>.
2.
Select each item and set it properly.
•
Camera title : Use alphanumeric
characters in the list and enter a
desired title in the bottom input line.
You can enter up to 15 characters for the
title.
•
Camera title position x, y : Specify the coordinates where the camera title is
displayed.
Time OSD Setup
1.
Select <Time OSD>.
2.
Select each item and set it properly.
•
Time display : Specify the use of time
display.
•
Date format : Specify the date format
that will be displayed on the screen.
•
Time position display X, Y : Specify the position of time.
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1.
From the Setup menu, select the
<Audio & Video (
2.
Click <Smart codec setup>.
3.
Select ROI Area.
•
Face Detection : Active if a face is
recognized on the monitoring screen.
M
Face detection can be worked when
the following conditions are satisfied:
-
-
-
•
Manual : Specify the ROI area to monitor manually.
54_ setup screen
)> tab.
Face Direction : R/L ±45 upward
Rotation Angle of Face : Length ±30, Width ±60
Minimum Size of Face : Larger than 20×20, based on the resolution of 320×240
Advertisement
Table of Contents
