Sealey AP2050 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1 GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice
p
regulations are adhered to when using this bench.
Locate bench in a suitable working area.
3
Keep the work area clean, uncluttered and ensure there is adequate lighting.
3
WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam
p
since the bench may sink into the surface.
Keep the bench clean and tidy in accordance with good workshop practice.
3
Keep children and unauthorised persons away from the working area.
3
DO NOT use the bench for any purpose other than that for which it is designed.
7
DO NOT undertake work on the bench without the workpiece being adequately secured. Use
7
clamps or a vice (not included) to secure the workpiece. Available from your Sealey dealer.
DO NOT use the bench out of doors.
7
DO NOT get the bench wet or use in damp or wet locations or areas where there is
7
condensation.
DO NOT clean the bench with any solvents which may damage the paint surface or the
7
protective coating on the wooden top.
DO NOT pull out all drawers at the same time.
7
Maximum weight for each drawer is 25 kg, full load for Workbench is 180 kg.
p
2. CONTENTS
2.1 Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make
immediate contact with your Sealey dealer.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
HEAVY-DUTY WORKSTATION WITH 5 DRAWERS
01284 757500
01284 703534
INSTRUCTIONS FOR:
AP2050
:
MODEL
www.sealey.co.uk
Web
sales@sealey.co.uk
email
AP2050 - 1 - 101005