Sealey AP2010 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
The use of symbols in this document is to attract your attention to possible danger. The symbols and warnings themselves do not eliminate any danger, nor are they substitutes for proper
accident prevention measures.
1. SAFETY INSTRUCTIONS
1.1 GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
F
Locate bench in a suitable working area.
!
Keep the work area clean, uncluttered and ensure there is adequate lighting.
!
WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
F
Keep the bench clean and tidy in accordance with good workshop practice.
!
Keep children and unauthorised persons away from the working area.
!
DO NOT use the bench for any purpose other than that for which it is designed.
%
DO NOT undertake work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure the
%
workpiece. Available from your Sealey dealer.
DO NOT use the bench outdoors.
%
DO NOT get the bench wet or use in damp or wet locations or areas where there is condensation.
%
DO NOT clean the bench with any solvents which may damage the paint surface or the protective coating on the wooden top.
%
2. CONTENTS
2.0 Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make
immediate contact with your Sealey dealer.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required
for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
AP2010
Sole UK Distributor, Sealey Group,
Bury St. Edmunds, Suffolk.
HARDWOOD TOP WORK BENCH
( WITH CUPBOARD ) MODEL
01284 757500 01284 703534
INSTRUCTIONS FOR:
) 2
:
A P 2 0 1 0
E-mail: sales@sealey.co.uk
AP2010 - 1 - 180102