3.4.9
Power Management
Options Summary
Power Mode
Select system power mode
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
RTC wake system from S5
Fixed Time: System will wake on the hr::min::sec specified./n Dynamic Time:
System will wake on the current time + Increase minute(s)
Chapter 3 – AMI BIOS Setup
ATX Type
Optimal Default, Failsafe Default
AT Type
Always On
Always Off
Last State
Optimal Default, Failsafe Default
Disable
Optimal Default, Failsafe Default
Fixed Time
62