Mitsubishi Electric MAC-100FT-E Operation Instructions And Installation Manual page 5

(Improper handling may have consequences, including injury or damage to building.)
■ To prevent damage from static electricity, touch a
nearby metal body to discharge static electricity
before touching the Plasma Quad Connect unit.
Static electricity from the human body may damage the
Plasma Quad Connect unit.
■ Do not install the Plasma Quad Connect unit a place
with much steam, such as bathroom.
Avoid places where water is splashed or where con-
densation forms on walls. Installing in such places can
cause electric shock or breakdown.
■ Do not install the Plasma Quad Connect unit in
places with direct sunlight or where the ambient
temperature is 40 ºC (104 ºF) or more or is 0 ºC
(32 ºF) or less.
Direct sunlight and hot or low temperature environments
may cause the Plasma Quad Connect unit to deform or
breakdown.
Caution
■ Do not use in special environments.
Use in places with much oil (including machine oil),
steam, or sulfuric gas may lead to severe decrease in
functionality and damage to parts.
■ Turn off power supply of connected equipment
when performing construction or wiring work.
Failure to turn off the power supply of the connected
equipment may lead to malfunction or breakdown of the
Plasma Quad Connect unit or connected equipment.
■ Install an earth leakage breaker depending on the
installation place.
If an earth leakage breaker is not installed, it could
cause electric shock.
en
EN-2