Attaching A Ready Indicator To A Wall Or Post - Canon AX-C4343W Technical Document

4
Operating procedures
ii)
2
Attach the ready indicator.
Join the hook-and-loop fasteners to
attach the ready indicator (
the volume adjustment buttons and the
mute switch can be operated and that the
LED lamps and IR data port can be seen.
4.6.3
This is suitable in cases in which the ready indicator and the image-capture computer
are not usually moved, including such environments as an X-ray exposure room.
1
Attach hook-and-loop fasteners.
i)
The fastener loops are attached using the adhesive
on the back.
ii)
44
Apply the fastener hook where you
want to attach the ready indicator
(behind the monitor) (

Attaching a ready indicator to a wall or post

Apply the fastener loops to the ready indicator
(on the side of the speaker holes) on the
positioning rib ( ).
Information
Remove any oil, water, or dust on the attachment side of the hook-and-loop
fastener using a cloth slightly damped with a neutral detergent.
Apply the fastener hook where you
want to attach the ready indicator (on a
wall or post) ( ).
).
). Check that
Fastener hook
Positioning rib
Fastener loop
Fastener
hook