Detector - Canon AX-C4343W Technical Document

3
Parts names and functions
3.1

Detector

The detector is designed to capture radiographic images.
F
A POWER switch
B Power LED
C READY switch
D READY LED
26
G H I
When the detector is off, press the POWER switch (for
at least 0.5 seconds) to turn on the detector.
When the detector is on, press and hold the POWER
switch (for at least 3 seconds) to turn off the detector,
or press and hold the POWER switch (for 1 second or
less) to establish the communication link.
Lights up when the detector turns on. Shows the
remaining battery pack charge.
Press and hold the READY switch (for at least 1
second) to switch between detector selection status
(Sleep) and exposure ready status.
This LED lamp flashes while the detector is
transitioning to exposure ready status, and lights up
when the detector enters exposure ready status.
Also flashes (approx. 3 seconds) when detector
linkage is initiated. Flashes in the case of errors.
A
B
C
D
E
J