Operative Instructions - Step By Step; Setup; Setup Password; Setup Report - ABB TS3 Instruction Manual

7 Operative instructions – step by step

7.1 Setup

The Setup menu is available after the user password insertion.
To return to previous menu press F4.
7.1.1

Setup Password

It is necessary to enter a password in order to modify some of the TS3 parameters; the default password is mentioned in
chapter 5.7.2.
This password may be modified by the user, with a new one having a length between 1 to 5 characters; it is necessary to
insert the old password, then the new one twice, to reconfirm it, and then save it pressing ENTER.
To remove the password, push ENTER as new password and reconfirm it.
7.1.2

Setup Report

With the "Setup report" functions, it is possible to reset the archive and archiving mode.
It is possible to archive the reports in circular mode; when necessary, the latest report will cover the oldest one.
In not circular mode, when reached the 99
will be saved. The user shall then clear the memory or change into circular mode.
888.902.6111
Figure 4
th
report, the user is informed that the available memory is full and no other reports
Figure 5
TS3 1SDH000670R0002
www.intellirentco.com
|
L3852 18/44