Administrator And Authorized User - Canon VB-C300 Operation Manual

Administrator and Authorized User

Two types of users, Administrator and Authorized User can use the NC Viewer.
Administrator is the root user who can use all the functions including the administration functions
(e.g., White Balance and Night mode) of the VB-C300.
Authorized User is a normal user who can use a limited set of functions. Register Authorized
User as directed in "Setting User Access Privileges (Access Control)" (→ P.1-15).
Administrator can use the functions listed below.
Corresponding button or menu
External Device Input button
Administrator - External Device Input
External Device Output button
Administrator - External Device Output
Control for Administrators button
Administrator - Control for Administrators
Shade Correction button
Administrator - Shade Correction
Microphone Setting button
View - Microphone
Administrator - White Balance
Administrator - Setup Properties
If you connect to the camera as Administrator, you can continue to have it forcibly
and Authorized User cannot get the camera control. After viewing, be sure to exit the
Note
viewer or click "Start/Stop Control" again to release the privilege.
Functions only available to Administrator
Display the external device input status
Operate External Device Output
Exposure/Night Mode Setting
Setting Shade Correction
Setting Sending Audio
Setting White Balance
Connection Settings/Camera Control/Display Option
Overview of NC Viewer
Function
When you connect to the VB-C300
as Administrator, "Administrator"
is displayed in red.
Start/Stop Control button
3-3