Before Using Your Dehumidifier; Carrying The Unit - Mitsubishi Electric MJ-E100AR-H Instruction Manual

Before Using Your Dehumidifier

Setting the silver ion
filter
The silver ion filter is supplied with the unit at time
of purchase. Please install it before using the unit.
1
Remove the silver ion filter from
the polyethylene bag.
2
Remove the pre-filter.
Performance is unaffected even if the metal fin
inside the unit are slightly bent.
3
Set the silver ion filter.
With the strips facing
up, set the silver ion
filter inside the tabs on
the pre-filter.
4
Set the pre-filter.
Make sure the silver ion filter is attached to the unit. If
it is not, fine dust will enter inside the unit and cause a
malfunction.

Carrying the Unit

Hold the handle and move it.
Handle
Pull the pre-filter toward
you, and then remove it.
Strips
Tabs (4)
Insert the bottom tabs
into the unit until they
click.
Wheels can be used to move the unit.
First make sure to remove water from the water tank
and close the louvre before carrying the unit.
z If wheels are unable to roll smoothly, do not use
z Do not carry the unit by holding the downward louvre.
z Do not put the unit in horizontal position during carrying as this may
z Use wheels to move the unit steadily in one direction.
z Lift the unit up to go over the doorsill or stairs and do not use wheels to
z Do not allow the power cord to be pulled into the wheels, as this may
Inserting the water
tank correctly
Tank
Make sure the
tank is not broken
or cracked.
Secure the tank lid and tank guard properly or else the
tank may become stuck.
Plugging the power cord
into the power socket
Use a 220V AC power socket only.
˜ The current humidity is indicated.
If the louvre is open, it closes automatically.
excessive force to move this unit so as to prevent
overturning.
cause malfunctions.
move the unit over the shaggy carpet as this may damage the carpet.
damage the cord.
Tank Lid
Tank Guard
Make sure the tank
guard is securely
attached.
Blip
9