Control Panel/Lcd Display - Mitsubishi Electric MJ-E100AR-H Instruction Manual

Names and Functions of Parts (Cont.)
Control Panel
LAUNDRY Lamps
LAUNDRY Switch
HUMIDITY SELECTION
Switch
z The dehumidifier remembers the operation mode. Even if the power plug is disconnected or the power is turned off, the
unit restarts at the previous setting.
z In the case of a power outage during operation, the dehumidifier will restart operation upon restoration in the operation
mode before the power outage.
LCD Display
z All of the indicators on the LCD display are shown for explanation purposes.
z When any switch is pressed, the LCD backlight will turn on for approximately 10 seconds.
Operating Mode Indicator
Swing Monitor
Humidity Indicator
Indicates the approximate humidity.
...... Current humidity
... Humidity setting in AUTO mode
The humidity is displayed in a range from 30 to 80%
8
MODE Switch
LCD Display
P10
P12
P12–14
Timer Display
P16
AIR PURIFIER Lamp
AIR PURIFIER Switch
P12
FULL Lamp
Lights when the tank
is full of water.
SWING LOUVRE Switch
P16
Information Display
Indicates the dehumidifier and
room conditions.
Low Temperature
Indicator
" " is displayed when
the room temperature
drops below 15°C.
P17 When " " is shown, it is
recommended that the
HIGH dehumidification
mode be activated.
P12
P6
P15
DRYING INSIDE
P19
Lamp
DRYING INSIDE
Switch
POWER Lamp
POWER Switch
ON/OFF TIMER
Switch
P17
High Humidity
Warning
" " flashes when the unit
is OFF and the humidity in
the room exceeds 75%.
" " is flashing, activating
the dehumidifier is
recommended.
If the High Humidity warning
is not used, remove the power
plug from the power socket.
P18