Cup Holder (If Equipped) - Suzuki SWIFT Owner's Manual

Engine Hood: 5
Cup Holder: 3
OTHER CONTROLS AND EQUIPMENT
2) Push the under-hood release lever up
with your finger, as shown in the illus-
tration. While pushing the lever, lift up
the engine hood.
4-11
63J161
3) Continue to lift up the hood until it is
high enough to support with the prop
rod.
To close the engine hood:
1) Lift the hood up slightly and remove the
prop rod from the hole. Put the prop rod
back to the holding clip.
2) Lower the hood close to the bumper,
then let it drop down.
Make sure the hood is securely latched
after closing.
WARNING
Make sure the hood is fully closed
and latched before driving. If it is not,
it can fly up unexpectedly during
driving, obstructing your view and
resulting in an accident.

Cup Holder (if equipped)

Front
EXAMPLE
63J065
Rear
EXAMPLE
The cup holders are provided in the center
console.
63J066
63J067
63JP0-01E