Spark Plugs - Suzuki SWIFT Owner's Manual

Windshield Washer Fluid: 3
Air Cleaner: 1, 2

Spark Plugs: 1, 2

INSPECTION AND MAINTENANCE
Spark Plugs
(1)
(1)
(1)
(1)
For nickel spark plugs (traditional type):
You should inspect spark plugs periodi-
cally for carbon deposits. When carbon
accumulates on a spark plug, a strong
8-15
spark may not be produced. Remove car-
bon deposits with a wire or pin and adjust
the spark plug gap.
To access the spark plugs:
1) Remove the four bolts (1) fixing the air
cleaner assembly.
2) Unclamp the air cleaner cover.
3) Remove the engine top cover.
4) If necessary, disconnect the coupler (2)
while pushing the release lever.
5) Remove the ignitor bolts.
6) Pull the spark plug boots out.
NOTE:
When installation, make sure the wires,
63J134
couplers, sealing rubber of top cover and
washers, are correctly returned in place.
54G105
EXAMPLE
Correct Wrong
60G102
CAUTION
• When disconnecting the spark plug
cables, pull on the boot, not on the
cable itself. Pulling on the cable
can damage it.
• When servicing the iridium/plati-
num spark plugs (slender center
electrode type plugs), do not touch
the center electrode, as it is easy to
damage.
63JP0-01E