Suzuki SWIFT Owner's Manual page 159

Bulb Replacement: 7
Side Turn Signal Light
As the bulb is built-in type, the light assem-
bly must be replaced. Remove the light
assembly by sliding the light housing front-
ward with your finger.
Other General Lights
Bulb holder
EXAMPLE
(2)
(2)
(1)
64J195
(1) Removal
(2) Installation
To remove a bulb holder from a light hous-
ing, turn the holder counterclockwise and
pull it out. To install the holder, push the
holder in and turn it clockwise.
INSPECTION AND MAINTENANCE
Bulb
EXAMPLE
(1)
(1)
(3)
(4)
(3) Removal
54G123
(4) Installation
There are two types of bulb, "Full glass
type" (1) and "Glass/metal type" (2).
To remove and install a full glass type bulb
(1), simply pull out or push in the bulb.
To remove a glass metal type bulb (2) from
a bulb holder, push in the bulb and turn it
counterclockwise. To install a new bulb,
push it in and turn it clockwise.
You can access the individual bulb or bulb
holders as follows.
(2)
54G124
8-28
63JP0-01E