Mitsubishi Electric M Series Installation Manual page 97

M SERIES - WALL MOUNTED
MFZ-KT / MFZ-KJ
S SERIES
SLZ-M / SEZ-M
P SERIES
PKA-M
(1) Take out the batteries.
(2) Cut jumpers JR05 - JR06 on the PC board as shown in the tab.
(3) Keeping OFF the remote controller, press
indoor unit number appear.
(4) Set the number as shown in tab. pressing
visualized.
(5) Press to confirm, the remote controller will shoutdown.
(1) Push SET button with an object that has an narrow end.
blink and number of model appears.
(2) Push twice mean button, number "0" now blink.
(3) Use button, to set the pair number.
(4) Push SET button with an object that has an narrow end.
(1) Push SET button with an object that has an narrow end.
blink and number of model appears.
(2) Push twice mean button, number "0" now blink.
(3) Use button, to set the pair number.
(4) Push SET button with an object that has an narrow end.
MITSUBISHI ELECTRIC / REMOTE CONTROLLER
for 2 seconds, until the
, until the right number is
.
.
Nr. JR05 JR06
0 No Modification No Modification
1 Cut JR05 No Modification
2 No Modification Cut JR06
3-9 Cut JR05 Cut JR06
Nr. J41 J42
0 No Modification No Modification
1 Cut J41 No Modification
2 No Modification Cut J42
3-9 Cut J41 Cut J42
Nr. J41 J42
0 No Modification No Modification
1 Cut J41 No Modification
2 No Modification Cut J42
3-9 Cut J41 Cut J42
95