Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 634

4. Press the START/STOP
Function number
5. Press the TEMP. "
Indoor unit address
6. Confirm the selected indoor unit address data by pressing the START/STOP
data will be transferred to the indoor unit.
• When the address data is properly set up on the indoor unit, the set number will be dis-
played. (GOOD)
• When the address data is not set up correctly, "- -" is displayed. (ERROR) Back to the previ-
ous step and set up the indoor unit address data again.
7. To return to the 2-wire remote controller address selection screen, press the START/STOP
button. If setting has been completed, press FAN "
selection screen.
When returning to the 2-wire remote
controller address selection screen
1-4. Address setting by remote controller
button to switch to the indoor unit address setting.
/
" or TEMP. " " button to adjust the indoor unit address number.
Example: When indoor unit address data "12" is set up
- (07-34) -
Indoor unit address
Example: Selecting indoor unit
address data "12"
Indoor unit address
ERROR GOOD
" button to return to the Menu 2-F1 item
Setting completed and returning to
the Menu 2-F1 item selection screen
button. The
/
/
1. System settings