Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 614

• Central remote controller address (Set N)
Before performing the initial setting, set the Central remote controller address first.
For details, refer to the setting manual.
1
* : Setting up more than one Network convertor in one VRF network system is prohibited.
2
* : The sum total of the Touch panel controller, Central remote controller, Network convertor
for Group remote controller, Modbus convertor, and Network convertor for LonWorks is a max-
imum of 16.
1-3. Manual address setting method
00
Central remote controller (Max. 16) *
- (07-14) -
01 02 03
1. System settings