Network Convertor (Uty-Vggxz1) - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

3-2. Network convertor (UTY-VGGXZ1)

¢ Accessory
Name and shape
Cable tie
Screw (M4 × 20 mm)
Dust proof bushing
Installation manual
3-2. Network convertor (UTY-VGGXZ1)
• With this Network convertor, single split type and multi system air condition-
ers can be controlled by System controller, Touch panel controller, Central
remote controller in VRF network system or by Wired remote controller con-
nected to the Network convertor.
• Start/Stop, operation mode, temperature setting, fan speed, etc. can be
done with these controllers.
• One Network convertor can be connected and controlled up to 16 indoor
units.
• Two Wired remote controllers are possible for one Network convertor.
• Up to 100 Network convertors can be connected in one VRF network sys-
tem. (One Network convertor is regarded as one refrigerant system. Total
refrigerant systems in one VRF network system must be within 100.)
Q'ty
4
4
1
1
For mounting the power supply cable, remote controller
cable, and transmission cable
For mounting the Network convertor
For connecting the power supply cable
(Except in U.S.A. and Canada)
- (05-115) -
Application
3. Adaptor/Convertor units