Cleaning And Care /6; Repositioning The Door /7 - Blomberg FNT 1670 XT Instruction Manual

GB
Cleaning and care
1. We recommend that you switch off the
appliance at the socket outlet and pull out the
mains plug before cleaning.
2. Never use any sharp instruments or abrasive
substances, soap, household cleaner, detergent
or wax polish for cleaning.
3. Use lukewarm water to clean the cabinet of
the appliance and wipe it dry.
4. Use a damp cloth wrung out in a solution of
one teaspoon of bicarbonate of soda to one
pint of water to clean the interior and wipe it
dry.
5. Make sure that no water enters the temperature
control box.
6. If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar.
7. We recommend that you polish the metal
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to protect
the high quality paint finish.
8. Any dust that gathers on the condenser,
which is located at the back of the appliance,
should be removed once a year with a vacuum
cleaner.
9. Check door seals regularly to ensure they
are clean and free from food particles.
10. Never:
• Clean the appliance with unsuitable material;
e.g. petroleum based products.
• Subject it to high temperatures in any way,
• Scour, rub etc., with abrasive material.
11. Make sure that the special plastic container
at the back of the appliance which collects
defrost water is clean at all times. If you want
to remove the tray to clean it, follow the
instructions below:
• Switch off at the socket outlet and pull out the
mains plug
• Gently crimp the stud on the compressor,
using a pair of pliers, so that the tray can be
removed
Instruction Manual
• Lift it up.
• Clean and wipe it dry
• Reassemble, reversing the sequence and
operations
12. To remove a drawer, pull it as far as
possible, tilt it upwards and then pull it out
completely.
Repositioning the door
Proceed in numerical order (Fig. 4).
6