NEUTRIK PowerCON HC Safety & Assembly Instructions

SAFETY & ASSEMBLY INSTRUCTION
PowerCON HC
IMPORTANT SAFETY INSTRUCTION
Attention:
FEATURES
·
250 Vac, 32 Amp (at ambient temperatures up to 35°C) / 30 Amp for cUR
·
Cable O.D. 17 mm (general range: 8.0 to 20.0 mm)
·
Wiring: Cable Connector: Screw-type terminals for stranded wires 6.0 mm (AWG 10)
Chassis Connector: Screw-type terminals for wires 6.0 mm (AWG 10)
ASSEMBLY INSTRUCTIONS
A
1
C
1.
®
Connector without breaking capacity acc. IEC 61984 - must not be engaged or
disengaged when under load or live.
|
CABLE CONNECTOR
2
3
2.
|
Locking 2P+PE AC appliance coupler
2
A
Slide bushing ( 1 ) and chuck ( 2) onto the cable end.
If cable O.D.:
Less 15 mm please use reducing piece (3).
B Prepare cable as shown.
Consider excessive length of PE conductor for
slackening.
Strip the wires.
C Insert wires into terminals L, N, PE
ATTENTION: Max torque 180 cNm
Wiring: *
N White
Page 1
2
25 mm
9 mm
[0.354"]
and tighten.
L Black
TORX TX 10
socket screws
PE Green
15 mm
®