Advertisement
Table of Contents
R
ASSEMBLY INSTRUCTION
etherCON TOP
Ruggedized RJ 45 Data Connector, IP65 and UL50E
IP 65 RATED AND UL50E APPROVED.
A
B
C
C1
D
STANDARD
VERSION
E
SPECIAL
VERSION
BDA 547
®
E
1
2
1
|
NE8MX-TOP
A
Cut cable end approx. 45°.
B
Slide the bushing over the cable.
To ease the boot assembly apply some
cable pulling lubricant to the cable ends.
Assembl the RJ45 plug on the cable.
e
C
Cut off
the
release tab of RJ45 plug.
C1
D
Put
the
chuck onto the cable.
Align the opening with the contact side.
Position the RJ45 in the chuck.
E
Attention:
RJ45 must be straight.
1
Special versions must engage in the
2
inner recess of the chuck.
Page 1
Advertisement
Table of Contents
Related Manuals for NEUTRIK etherCON TOP NE8MX-TOP
Summary of Contents for NEUTRIK etherCON TOP NE8MX-TOP
- Page 1 ASSEMBLY INSTRUCTION etherCON TOP ® NE8MX-TOP Ruggedized RJ 45 Data Connector, IP65 and UL50E IP 65 RATED AND UL50E APPROVED. Cut cable end approx. 45°. Slide the bushing over the cable. To ease the boot assembly apply some cable pulling lubricant to the cable ends. Assembl the RJ45 plug on the cable.
- Page 2 T: +91 / 982 05 43 424 F: +91 / 22 26163 540 Draft. Nr.: BDA 547 Update: 06.09.2018 ® ® Data subject to change without prior notice. 2018 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark. © www.neutrik.com Page 2...
Need help?
Do you have a question about the etherCON TOP NE8MX-TOP and is the answer not in the manual?
Questions and answers