Panasonic KX-TD816 Programming Manual page 352

5.3 Extension Programming
17.
Press the Auto/OK button.
Display example:
18.
If you select "ENABLE" in step 16, enter a System Lock password.
Display:
19.
Press the Auto/OK button.
Display:
20.
Enter the System Lock password again.
Display:
21.
Press the Auto/OK button.
Display:
(With a display PT)
22.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration numbe .
23.
Repeat steps 4 through 21.
24.
Press END.
Conditions
• It is possible to search the display by pressing # (Next) or (Previous) in steps 8 and 10.
• You can assign an extension number to each PS also in progr amme [671]PS Extension
Number Set.
• The PS password can be assigned in progr amme [672]PS Password Set.
• One PS must have only one registration number. It is not possible to assign the different
registration number for one PS.
• If the PS extension number or the PS password is changed after registering, the PS cannot
be used until it is registered again in this programme.
• Do not press END after step 15, or it may not registered correctly.
352
(if disabled): UNLOCKED
(if enabled):
ENTER PASSWORD
=****
REENTER PASSWORD
=
REENTER PASSWORD
=****
LOCKED
ENTER PASSWORD
=
DECT Programming