[314-3 21]Ars Leading Digit Entry For Plans 1 Through 8 - Panasonic KX-TD816 Programming Manual

2.4 TRS / ARS Programming
[314-321] A RS Leading Digit Entry for Plans 1 through 8
Description
By entering numbers into each leading digit plan (programmes below) you are starting the
process to determine which outside line group will be used to route the call.
Programme
Plan
These eight plans are used to analyse the number which the user dials and decide the route plan
for the call. If the user-dialled number is registered in Plan 1, then Routing Plan 1 is selected
for the call. Automatic Route Selection (ARS) Leading Digit Entry for Plans 1 through 8 match
ARS Routing Plans 1 through 8 (programmes [322] through [329]) respectively.
Selection
• Location number: 01 through 50
• Leading digit number: 7 digits (max.)
Default
All locations – Not stored.
Programming
1.
Enter a programme address (314 through 321).
Display example: ARS Leading PL-1
2.
Press NEXT.
Display: Location NO?
3.
Enter a location numbe .
To enter location number 01, you can also press NEXT.
Display example: 01:Not Stored
4.
Enter a leading digit numbe .
To delete the current entry, press CLEA .
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location numbe .
7.
Repeat steps 4 through 6.
8.
Press END.
130
[314] [315] [316]
1 2 3
[317] [318] [319]
4 5 6
[320] [321]
7 8
General Programming